LT Distribution Panel:
A LT distribution panel is a component of an electricity supply system which divides an electrical power feed into other circuits; it has a key role in supplying power and protecting permanently installed equipment for building such as power and lighting facilities while providing a protective fuse or circuit breaker for each circuit, in a common enclosure.
AMF (Auto Main Failure) panel:
AMF panel is the short form of Auto Main Failure panel. It is normally connected to the generator set to control the generator set function. It can call the generator set if the AMF further connected to the Main Switch Board (received power from the other source – normally from the local authority) which equipped with auto transfer switch/automatic changeover contactor. While normal supply serve to main switch board failed, the AMF board will send the power failure signal to generator set. Then the generator set will run and serve the supply to main switch board.
APFC (Automatic Power Factor Control) Panels
Modern power networks consists of wide variety of electrical and power electronics loads, in case of such varying loads, the power factor also varies as a function of the load requirements .So it is practically difficult to maintain consistent power factor by the use of fixed compensation i.e. fixed capacitors which shall need to be manually switched to suit the variations of the load. It can lead to situations where the installation can have a low power factor leading to higher demand charges and levy of power factor penalties. In addition to not being able to achieve the desired power factor it is also possible that the use of fixed compensation can also result in leading power factor under certain load conditions. This is also unhealthy for the installation as it can result in over voltages, saturation of transformers, mal-operation of diesel generating sets, penalties by electricity supply authorities etc.
It is therefore necessary to automatically vary, without manual intervention, the compensation to suit the load requirements. This is achieved by using on Automatic Power Factor Correction (APFC) system which can ensure consistently high power factor without any manual intervention. In addition, the occurrence of leading power factor will be prevented. APFC products are fully automatic in operation and can be used to achieve, consistently high power factor under fluctuating load conditions Reduced KVA demand charges, Lower energy consumption in the installation by reducing losses Preventive leading power factor in an installation.
Automation Control Panels:
We offer a wide range of Automatic control Panels which are compact in design and robust construction. Instant available use in various industrial applications. We have a complete range for the automation control panel ie.
PLC Panel: A Programmable Logic Controller, PLC or Programmable Controller is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines and control of Electric supply to various electrical loads. Successfully interfaced with the panels and is installed in various Industries.
Relay Control Panel: Relays are intended for use in variety of applications, environments and industries. We offer a wide range of Relay Control Panels, developed and designed keeping in mind use of advanced technology and quality components. Relay Control Panels have high functional values and performance capabilities. Panel’s robust construction makes it more reliable and durable.
AC & DC Drives Panel: Your choice depends on many application-specific factors such as ambient conditions, type of loads, duty cycle, maintenance accessibility, horsepower range, sequencing, and more. Brief guidelines have been developed to provide you with a basic understanding of the differences between AC and DC drive technologies. If you have specific questions, or require application/selection assistance, please inquire for further assistance from us.